TM 5-3895-382-24
2-1. BACK-UP ALARM OVERRIDE SWITCH
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Materials/Part
Tool Kit, General Mechanic's: Automotive
Lockwasher
(SC 5180-90-N26), Tool Number W33004,
NSN 5180-00-177-7033
Equipment Condition
Wrench, Torque (0-170 lb-ft)
Engine OFF (TM 5-3895-382-10)
NSN 5120-00-640-6364
Battery disconnect switch turned OFF
(TM 5-3895-382-10)
Drum and wheels chocked
a.
Removal.
(1)
Open grill (1).
(2)
Remove nut (2), lockwashers (3), and
switch (4) from bracket (5). Discard
lockwasher.
(3)
Tag, mark, and disconnect two wires (6
and 7) from switch (4).
(4)
If
damaged,
removed
two
bolts
(8),
washers (9) and bracket (5) from backup
alarm (10) and frame (11).
b.
Installation.
(1)
If removed, install bracket (5) to backup
alarm (10) and frame (11) with two
washers (9) and screws (8). Tighten bolts
to 40 lb-ft (55 Nm).
(2)
Install two wires (6 and 7) on switch (4).
(3)
Install switch (4) on bracket (5) with
lockwasher (3) and nut (2).
(4)
Close grill (1).
NOTE
Follow-on
Maintenance:
Remove
chocks.
END OF TASK
2-2
