TM 5-3895-379-23
ILLUSTRATED LIST OF MANUFACTURED ITEMS - CONTINUED
0221 00
WIRING HARNESS TUBING FABRICATION
The wiring harness tubing is fabricated by cutting a length from tubing stock (listed in Table 10 and Table 11) with a fine
tooth hacksaw blade.
Table 10. Rear Harness Tubing.
Cut Length
Location
Part Number
Inches (mm)
By Speed Sensor Connector
5P3619
13 (320)
By Vibratory Sensor Connector
5P5112
11 (270)
By Main Harness Connector
5P5112
22-1/2 (572)
Table 11. Front Harness Tubing.
Cut Length
Location
Part Number
Inches (mm)
By Vibratory Sensor Connector
5P5112
13 (330)
By Main Harness Connector
5P5112
67 (1702)
EDGING (CHANNEL) FABRICATION
The edging is fabricated by cutting a length from channel stock (listed in Table 12) with a fine-toothed hacksaw blade.
Table 12. Edging Channel.
Cut Length
Location
Part Number
Inches (mm)
On ROPS Gusset
091-8487
12 3/16 (310)
Water Line Protector on Front and
091-8487
6 1/2 (165)
Rear Bumper Assemblies
0221 00-23/(0221 00-24 Blank)
