TM 5-3895-379-23
ILLUSTRATED LIST OF MANUFACTURED ITEMS - CONTINUED
0221 00
BATTERY CABLE FABRICATION
NOTE
This illustration is provided as reference. Actual appearance of components may vary.
PROTECTOR C
TERMINAL A
CUTOFF LENGTH
PROTECTOR D
BULK CABLE
TERMINAL B
401-789
NOTES:
1. Obtain all components required to fabricate desired battery cable. Refer to TM 5-3895-379-23P for component part
numbers.
2. Use a fine-toothed hacksaw blade or suitable cutting device, and cut cable to indicated length.
3. Remove about 1 in. (25 mm) of insulation from each end of cable.
4. Slide terminal protectors C and D on cable as indicated.
5. Place battery cable terminals A and B on cable as indicated.
6. Crimp battery cable terminals on cable.
Figure 1. Battery Cables.
Table 2. Battery Cables and Components.
Cutoff
Length
Battery Cable
Battery Cable
Terminal
Terminal
Battery Cable
In. (mm)
Terminal A
Terminal B
Protector C
Protector D
LOCATION
Battery Disconnect
24 (610)
YES
YES
YES
YES
Switch to Battery
Battery Disconnect
13 (330)
YES
YES
NO
NO
Switch to Frame
Battery to Battery
8 (200)
YES
YES
YES
YES
NATO Connector to
67 (1700)
YES
YES
NO
NO
Starter
Battery to NATO
23 (580)
YES
YES
YES
YES
Connector
0221 00-2
