TM 5-3895-379-23
MAINTENANCE ALLOCATION CHART (MAC) - CONTINUED
0218 00
Table 3. Remarks for the CB534 Roller.
(2)
(1)
REFERENCE
CODE
REMARKS
A
Limited repair by replacement of external seals and clamp only.
B
SRA or Dealer for repair.
C
Limited repair by replacement of cartridge only.
D
Repair by replacement of components.
E
Replace electrical components at Unit Maintenance and hydraulic components at Direct Support
Maintenance.
F
Some lines and fittings are removed by Unit Maintenance while other lines and fittings are removed
by Direct Support Maintenance.
G
Component parts, such as terminals and wires may be replaced or repaired by Unit Level
Maintenance. The assembly as a whole must be replaced by Direct Support Maintenance.
H
Propel control lever handle must be disassembled by Unit Maintenance to replace on/off switch.
J
Operator adds fluids only. Unit Maintenance drains and fills assembly.
P
Preventive Maintenance Checks and Services (PMCS).
END OF WORK PACKAGE
0218 00-16
