TM 5-3895-379-23
RESILIENT DRUM MOUNTS REPLACEMENT
0211 00
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure than any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of plate and support is 310 lb (141 kg).
1.
Attach lifting device straps with link bracket to plate (1) and support (2).
2.
Remove twenty-four bolts (3) and washers (4) that fasten plate (1) to mounts (5).
3.
With assistance, remove plate (1) and support (2) as a unit from drum assembly (6).
4.
Remove twenty-four bolts (7), washers (8) and nuts (9) that fasten six mounts (5) to drum assembly (6).
INSTALLATION
1.
Install twenty-four bolts (7), washers (8) and nuts (9) that fasten six mounts (5) to drum assembly (6).
2.
Attach lifting device straps with link bracket to plate (1) and support (2). Install twenty-four bolts (3) and washers
(4) that fasten plate (1) to mounts (5) and install plate (1) and support (2), as a unit, to drum assembly (6).
3.
Install propel motor (WP 0192 00).
4.
Install vibratory motor (WP 0206 00).
5.
Install supports (bumpers) (WP 0122 00).
6.
Remove chocks (TM 5-3895-379-10).
0211 00-2
