TM 5-3895-379-23
REAR CHASSIS WIRING HARNESS REPLACEMENT - CONTINUED
0111 00
INSTALLATION
NOTE
Install cable ties as required.
1.
Position wiring harness in frame assembly and yoke assembly.
2.
Install two wires (33) on right-rear work light assembly (30) and tighten two screws (32).
3.
Install right-rear work light assembly (30), screw (29) and nut (28) on bracket (31).
4.
Install support (26), washer (24), screw (25), two washers (24) and screws (23) on support (27).
27
23
25
24
24
26
401-598
5.
Install two wires (42) and (43), washers (41) and nuts (40) on backup alarm (37).
6.
Insert two washers (38) and screws (36) on backup alarm (37) and position on rear bumper assembly (39).
7.
Tighten two screws (36).
40
43
41
36
42
38
37
39
401-597
0111 00-7
