TM 5-3895-379-23
FRONT CHASSIS WIRING HARNESS REPLACEMENT - CONTINUED
0110 00
INSTALLATION
NOTE
Install cable ties as required.
1.
Position front chassis wiring harness (41) in frame assembly, yoke assembly, and front support assembly.
2.
Install two wires (31) on left-front work light assembly (40) and tighten two screws (30).
3.
Install left-front work light assembly (40) on bracket (29) with screw (27) and nut (26).
31
41
27
CABLE TIE
30
40
35
32
401-586
4.
Install support (24), washer (22), screw (23), two washers (22) and screws (21) on support (25).
22
21
25
23
24
22
401-585
0110 00-8
