TM 5-3895-379-23
THROTTLE CABLE REPLACEMENT (CB534B)- CONTINUED
0045 00
ADJUSTMENT - CONTINUED
7.
Slide spring-loaded sheath (1) back and connect ball
joint assembly (3) on governor lever. Release lock and
allow lock to return to locked position.
1
3
2
401-318
8.
Loosen friction lock (31) by turning friction lock to left and push button (29) and throttle cable handle (30) fully down.
Release button.
NOTE
Start engine and ensure that governor lever is still in the over-travel position when the throttle control is
moved to the high idle position. Stop engine.
9.
Close right-side door assembly (TM 5-3895-379-10).
10.
Operate roller and check for proper operation (TM 5-3895-379-10).
END OF WORK PACKAGE
0045 00-14
