TM 5-3895-379-23
THROTTLE CABLE REPLACEMENT (CB534B) - CONTINUED
0045 00
REMOVAL - CONTINUED
15.
Push button (29) and throttle cable handle (30) down
29
as far as possible.
16.
Turn friction lock (31) to left until it is loose on throt-
30
tle cable handle (30).
17.
Loosen locking nut (32) and lockwasher (33) on throt-
31
tle cable handle (30).
18.
Loosen knurled nut (34) on throttle cable (4) and
allow knurled nut to drop free on throttle cable.
24
19.
Remove throttle cable handle (30) from throttle cable
(4).
33
20.
Remove locking nut (32) and lockwasher (33) from
throttle cable handle (30). Discard lockwasher.
32
21.
Remove throttle cable handle (30) from operator sta-
tion (24).
34
22.
Remove throttle cable (4) from operator station (24).
4
401-313
INSTALLATION
1.
Guide throttle cable (4) through operator station (24).
2.
Position throttle cable handle (30) on operator station (24).
3.
Position new lockwasher (33) and new locking nut (32) on throttle cable handle (30).
4.
Install throttle cable handle (30) on throttle cable (4) and tighten knurled nut (34).
CAUTION
Do not tighten locking nut more than 10 lb-ft (14 Nm) or damage will occur to throttle cable handle.
5.
Tighten locking nut (32) and lockwasher (33) on throttle cable handle (30).
6.
Tighten friction lock (31) on throttle cable handle (30) with throttle cable handle pushed down as far as possible.
0045 00-7
