TM 5-3895-379-23
AIR CLEANER SUPPORT ASSEMBLY REPLACEMENT - CONTINUED
0033 00
REMOVAL - CONTINUED
8.
Remove two screws (30) and washers (31) from
mounting bracket (11).
11
31
30
401-299
9.
Remove screw (32), washer (33) and mounting
32
34
bracket (11) from engine (34).
INSTALLATION
33
1.
Install mounting bracket (11) on engine (34) with
washer (33) and screw (32). Do not tighten screw.
2.
Install two washers (31) and screws (30) on mounting
bracket (11). Tighten screws to 33-47 lb-ft (45-64
Nm).
3.
Tighten screw (32) to 33-47 lb-ft (45-64 Nm).
11
401-300
4.
Install brake control valve (29) on air cleaner support assembly (11) with two washers (28), screws (27), washers (26)
and nuts (25). Tighten nuts to 33-47 lb-ft (45-64 Nm).
NOTE
Install new tiedown straps on wiring harness as required.
5.
Install wiring harness (24) on mounting bracket (11).
6.
Position hose (23) in clamp (22) and install clamp on mounting bracket (11) with two screws (20) and plate (21).
7.
Position hose (19) in clamp (18) and install clamp on two screws (20) with two screws (16) and plate (17).
8.
Position hose (15) in clamp (14) and install clamp and plate (13) on two screws (16) with two screws (12).
0033 00-3