TM 5-3895-379-23
IFUEL LINES AND FITTINGS REPLACEMENT (CB534C) - CONTINUED
0030 00
FUEL INJECTOR LINES AND FITTINGS INSTALLATION
1.
Install fuel return line (38) to fuel injectors (32).
2.
Install eight washers (37), three bolts (36) and bolt (35) to fuel injectors (32).
3.
Install four fuel injection lines (31) to roller.
NOTE
Secure fittings (33) with a wrench when connecting fuel injection line (31) to fuel injection pump.
4.
Install four fuel injection lines (31) on fuel injection pump (34).
5.
Install four fuel injection lines (31) on fuel injection nozzles. Tighten fuel injection line fittings to 13 lb-ft (18 Nm).
6.
Install fuel filter assembly (WP 0040 00, Fuel Filter Assembly Maintenance).
7.
Place battery disconnect switch in ON position (TM 5-3895-379-10).
8.
Lower operator platform (WP 0128 00).
9.
Close left and right-side door assemblies (TM 5-3895-379-10).
10.
Fill fuel tank (WP 0037 00).
11.
Prime fuel system (WP 0041 00, Priming Fuel System).
12.
Start engine and check for proper operation and fuel leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0030 00-5/(0030 00-6 Blank)
