TM 5-3895-379-23
EQUIPMENT DESCRIPTION AND DATA - CONTINUED
0002 00
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS
NOTE
Location and description of major components are the same for the CB534B and CB534C Rollers. CB534B
Roller is shown.
1
2
14
3
12
13
4
11
5
6
7
6401-2022
9
10
8
KEY
COMPONENT
DESCRIPTION
1
Rollover Protective Structure
The ROPS canopy helps protect operator from potential hazards
(ROPS)
resulting from equipment rollover and falling objects.
2
Hydraulic/Fuel Tank
The fuel and hydraulic tanks are connected, yet separate. Fuel is stored
in the right-side. The left-side stores hydraulic oil.
3
Water Spray Bars
The water spray bars spray the drum surfaces with water to help
prevent hot asphalt from sticking to drums. There is a water spray bar
located above front and rear drum.
4
Frame Assembly
The frame assembly provides a means of support for roller
components.
5
Vibratory Motors
The vibratory motors turn eccentric weights inside drums which create
vibrating force that aids in surface material compaction. They are
located on left-side of the rear drum and right-side of the front drum.
6
Scrapers
The scrapers keep drums clean to provide a smooth compacted surface.
7
Engine Compartment
The engine and hydraulic pumps are located in this compartment. The
engine and pumps power the steering, propulsion, and vibratory
systems.
0002 00-2
