TM 5-3895-379-23-2
0224
REMOVAL
WARNING
Fuel and oil are very slippery. Use drain pan to capture any fluid which may drain from lines.
Dispose of In Accordance With (IAW) local policy and ordinances. Ensure all spills are
cleaned up.
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap lines
and plug openings after removing lines. Contamination of hydraulic system could result in
premature failure of the roller.
NOTE
Tag and mark all hydraulic lines and hoses to ensure correct installation.
Inspect all hoses, lines, and fittings for cracks, bends, nicks, dents, stripped treads, and
cuts. Replace all damaged parts.
1.
Disconnect four hose assemblies (Figure 1, Item 1) from steering control unit (SCU) (WP 0222).
2.
Remove bolt (Figure 1, Item 15), cover (Figure 1, Item 16), four clamps (Figure 1, Item 8), and plate
(Figure 1, Item 17).
3.
Remove transfer (Figure 1, Item 18) and spring nut (Figure 1, Item 19).
4.
Raise operator platform assembly (WP 0235).
5.
Remove screw (Figure 1, Item 4), washer (Figure 1, Item 5), loop clamp (Figure 1, Item 6), retainer
(Figure 1, Item 7), and clamps (Figure 1, Item 8) from frame.
6.
Disconnect hose assembly (Figure 1, Item 13) from steering pump (Figure 1, Item 14).
7.
Disconnect hose assemblies (Figure 1, Items 11 and 12) from tee fittings (Figure 1, Item 9). Remove O-rings
(Figure 1, Item 10). Discard O-rings.
8.
Disconnect hose assembly (Figure 1, Item 3) from manifold (Figure 1, Item 2).
0224-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00162)
