TM 5-3895-379-10
EQUIPMENT DESCRIPTION AND DATA - CONTINUED
0002 00
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS
NOTE
Location and description of major components are the same for the CB534B and CB534C Rollers. CB534B
Roller is shown.
1
2
14
3
12
13
4
11
5
6
7
6401-2022
9
10
8
KEY
COMPONENT
DESCRIPTION
1
Rollover Protective Structure
The ROPS canopy helps protect the operator from potential hazards
(ROPS)
resulting from equipment roll over and falling objects.
2
Fuel/Hydraulic Oil Tank
The fuel and hydraulic tanks are connected, yet separate. Fuel is stored
in the right side. The left side stores hydraulic oil.
3
Water Spray Bars
The water spray bars spray the drum surfaces with water to help
prevent hot asphalt from sticking to the drums. There is a water spray
bar located above front and rear drum.
4
Frame Assembly
The frame assembly provides a means of support for the roller
components.
5
Vibratory Motors
The vibratory motors turn eccentric weights inside the drums which
create vibrating force that aids in surface material compaction. They
are located on the left side of the rear drum and the right side of the
front drum.
6
Scrapers
The scrapers keep drums clean to provide a smooth compacted surface.
7
Engine Compartment
The engine and hydraulic pumps are located in this compartment. The
engine and pumps power the steering, propel, and vibratory systems.
0002 00-2
