TM 5-3895-383-24
Adjust
Loosen the two bolts. Adjust the steel scraper to 25 mm (1
inch) from the drum surface.
Padded Drum Scraper Assembly (If Equipped)
Adjust
Illustration 179
There is one scraper that is located in front of the drum.
Illustration 180
There is an optional scraper that is located at the rear of the
drum.
1.
Inspect the scraper. Clean the dirt and the debris from
the scraper
2.
There are two bolts (2) for each scraper. Each scraper
is individually adjustable.
3.
Slide the scraper toward the drum. Adjust the tips so
the tips are 25 mm (1 inch) from the surface of the
drum.
4.
Tighten bolts and the nuts.
Maintenance Section
Drum Scrapers - Inspect/Adjust/Replace
1-84