TM 5-3895-383-24
15.
Remove 14 (48), and remove seven pistons (47), center
pin (49) and retaining plate (50) from shaft assembly
(45).
16.
Check seven pistons (47) at areas (X) for scratches and
pitting. If necessary, replace the pistons.
Piston rings (51) may break apart during removal from the
pistons. If the rings are to be removed, wear eye
protection to prevent possible personal injury from flying
parts.
17.
Use a screwdriver to remove piston rings (51) from each
of the pistons.
18.
Check center pin (49) at areas (Y) for scratches and
pitting. If necessary, replace the center pin.
19.
Check shaft assembly (45) at areas (Z) for scratches
and pitting. If necessary, replace the shaft assembly.
20.
Remove retaining ring (52) from housing (37).
14-129