Disassemble & Assemble Vibratory
Motor (CS-563D & CP563D) 5058-017
remove vibratory motor
Dirt can damage precision made parts of the motor.
Disassemble the motor on a clean work surface. Clean all
the parts separately in clean solvent and let the parts dry
at room temperature. Check the condition of all parts and
refer to Guideline For Reusable Parts, Piston Pumps And
reconditioning and determining the reusability of parts.
Remove four screws (9), and remove port block (8) and
O-ring seal (14) from housing (1).
Remove plug (26), spring (24), poppet (23), snap ring
(21), and flushing orifice (22) from the port block.
Remove O-ring seal (25) from plug. Check the O-ring
seal for wear or damage and replace if necessary.
Remove plug (15), spring (17) and spring retainer (18)
from port block (8). Remove O-ring seal (16) from the
plug. Check the O-ring seal for wear or damage and
replace if necessary.
Remove plug (31), spring (29), spring retainer (28) and
spool (27) from port block (8). Remove O-ring seal (30)
from the plug. Check the O-ring seal for wear or
damage and replace if necessary.