Remove ten bolts (3), and use a hoist and lifting straps
to remove plate (1) from drum gear reducer (2).
NOTE: The weight of the plate is 93 kg (205 lb) on the
CP-563D. The weight of the plate is 94 kg (207 lb)
on the CS-563D.
NOTE: For installation of the drum gear reducer, reverse
the removal steps.
NOTE: After the drum gear reducer has been installed, fill
it with oil to the correct level. See the Operation &
Maintenance Manual for the correct procedure.
Drum Gear Reducer (CS-583D)
Remove & Install Drum Gear
Reducer (CS-583D) 5655-010
Drain the oil from the drum gear reducer into a suitable
container. The capacity of the drum gear reducer is 12
liters (3.12 U.S. gal).
Attach a lifting strap and hoist to drum propel motor (1).
Remove two bolts (2), and remove drum propel motor
(1) from the drum gear reducer.
Attach Tooling (A) and a hoist to plate (3) as shown.
Remove ten bolts (4), and remove plate (6) from the
drum gear reducer. The weight of the plate is 160 kg