If necessary, remove bearing cup (74) from differential
Assemble Axle 3278-016
Ring Gear Installer
Dial Indicator Gp.
* Tooling (H), FT-2519 Rolling Torque Bracket Assembles,
consists of three Items used during this assembly procedure.
Item 1 is used during Step 55 to tighten the pinion nuts. Item 2
is used during Step 25 to check the bearing preload of the axle
assemblies. Item 3 is used during Step 42 to check bearing
preload of the differential assembly and during Step 55 to check
bearing preload of the pinion assembly.
Install bearing cup (74) in differential housing (75).