Use two persons to remove differential assembly (48)
from the differential housing. The weight of the
differential assembly is 36 kg (80 lb).
If necessary, use Tooling (B) to remove bearing
Turn the differential assembly over. If necessary, use
Tooling (F) to remove bearing assembly (50).
Disconnect hose assembly (3) from brake actuator (54).
Remove two nuts and bolts (52). Remove the two nuts
and clamp (53).
Plug (55) is under spring pressure and could cause
personal injury. Remove plug (55) carefully.
Remove the fitting and plug (55) from the brake
actuator. Remove the O-ring seal from the plug. Check
the O-ring seal for wear damage and replace if
Remove the spring from inside brake actuator (54).
Remove the two nuts from inside the brake actuator.
The two nuts hold the brake actuator on the brake
Remove the bracket and brake actuator (54) from the
right side axle housing.
Remove pinion assembly (51) from the differential