TM 5-3895-383-24
7.
Remove O-ring seal (5) from gerotor housing (4).
Check the O-ring seal for wear or damage and replace if
necessary.
8.
Remove gerotor (6), spacer (7), drive (8) (not shown)
and spacer plate (9) as a unit.
(2) End cap. (3) O-ring seal. (4) Gerotor housing. (8) O-ring
seal. (6) Gerotor. (7) Spacer. (8) Drive. (9) Spacer plate.
9.
Components of the gerotor assembly shown in above
photo.
NOTE:
Gerotor housing (4) and Gerotor (6) are not
serviced separately.
10.
Remove seal (10). Check for wear or damage.
Replace if necessary.
11.
Remove spool and sleeve assembly (11) from control
housing (12).
14-19