TM 5-3895-383-24
Disassemble & Assemble Metering
Pump (Steering) 4343-017
Start By:
a.
remove metering pump (steering)
1.
Be sure the outside of the metering pump (steering) is
thoroughly clean and free of dirt and debris prior to
disassembly. Make alignment marks on the valve body
to aid in proper assembly.
2.
Remove seven cap screws (1).
3.
Remove end cap (2).
4.
Remove O-ring seal (3) from end cap (2). Check the
O-ring seal for damage or wear and replace if
necessary.
5.
Place the metering pump (steering) on end so internal
components will not fall out.
6.
Remove gerotor housing (4). Lift the housing straight
up.
14-18