TM 5-3895-383-24
6.
Remove thrust plate (19) from housing.
7.
Remove seal (21) and backup ring (20) from thrust plate
(19). Check the seals for wear or damage, and replace
if necessary.
8.
Remove two O-ring seals (22) from housing. Check the
O-ring seals for wear or damage and replace if
necessary.
9.
Remove housing from mounting plate (23).
10.
Remove thrust plate (25) from drive (26) and idler (24)
sprockets.
11.
Remove seal (28) and backup ring (27) from thrust plate
(25). Check the seals for wear or damage, and replace
if necessary.
NOTE:
During the assembly of the steering pump, install
the seal rings in the thrust plates with the groove
facing up. Install the back up rings with the flat
strip furthest away from the seal ring.
14-15