TM 5-3895-383-24
Cab
Tilt & Lower Cab 7301-084
1.
Open the engine enclosure.
2.
Install steering lock pin (1) in the locked position as
shown.
3.
Remove four screws (2) from storage compartment (3)
and remove it from the left side of the cab.
4.
Remove three screws (4) from storage compartment (5)
and remove it from the right side of the cab.
5.
Remove nut (8), washer (7), rubber mount (6) and bolt
(9) from both sides of the cab. During installation,
tighten the two bolts to a torque of 775 ± 100 N m (575
± 75 lb-ft).
6.
Remove nut and bolt (10) from both sides of the cab.
During installation, tighten the two bolts to a torque of
775 ± 100 N m (575 ± 75 lb-ft).
14-11