TM 5-3895-383-24
Operators Platform
Tilt & Lower Operators Platform
7253-084
Tools Needed
A
8S-9906
Rachet Puller
1
138-7575
Link Bracket
2
1.
Install steering lock pin (1) in the locked position as
shown.
2.
Disconnect four electrical connectors (2).
3.
Remove four bolts (4).
4.
Install two pins (3) in the pivot points as shown.
5.
Use Tool (A) to raise operators platform (5) as shown.
6.
Install two pins (6) to hold the operators platform in the
tilted position.
NOTE:
To lower the operators platform, reverse the tilt
steps.
14-10