Important Safety Information
Most accidents involving product operation, maintenance and repair are caused by failure to observe basic safety rules or precautions.
An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to
potential hazards. This person should also have the necessary training, skills and tools to perform these functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in injury or death.
Do not operate or perform any lubrication, maintenance or repair on this product, until you have read and understood the
operation, lubrication, maintenance and repair information.
Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury
or death could occur to you or other persons.
The hazards are identified by the "Safety Alert Symbol" and followed by a "Signal Word" such as "WARNING" as shown below.
The meaning of this safety alert symbol is as follows:
Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning, explaining the hazard, can be either written or pictorially presented.
Operations that may cause product damage are identified by NOTICE labels on the product and in this publication. Caterpillar cannot
anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are
therefore not all inclusive. If a tool, procedure, work method or operating technique not specifically recommended by Caterpillar is
used, you must satisfy yourself that it is safe for you and others. You should also ensure that the product will not be damaged or made
unsafe by the operation, lubrication, maintenance or repair procedures you choose.
The information, specifications, and illustrations in this publication are on the basis of information available at the time It was written.
The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These
changes can affect the service given to the product. Obtain the complete and most current information before starting any job.
Caterpillar dealers have the most current information available. For a list of the most current publication form numbers available, see
the Service Manual Contents Microfiche, REG1139F.
When replacement parts are required for this product,
Caterpillar recommends using Caterpillar replacement
parts with equivalent specifications including, but not
limited to, physical dimensions, strength and material.
Failure to heed this warning can lead to premature
failures, product damage, personal injury or death.