TM 5-3895-383-24
Illustration 10
Front Of Machine (Above Leveling Blade)
(2) Cylinder.
Leveling blade is attached to the machine at the drum yoke.
Control valve (1) directs oil to the blade cylinder (2) and away
from the blade cylinder. The blade is raised and lowered by
retracting or extending cylinder (2). The maximum depth of cut
with the leveling blade is 76.2 mm (3.00 inch).
Leveling Blade Hydraulic System
SMCS Code: 5051
HOLD Position
Illustration 11
Leveling Blade Control Valve In HOLD
(1) Detent. (2) Centering springs. (3) Passage to rod end of
cylinder. (4) Outlet passage. (5) Passage to head end of
cylinder. (6) Spool. (7) Relief valve. (8) Inlet passage. (9)
Valve body.
13-11