TM 5-3895-383-24
NOTE
· Tag and mark all hoses prior to
removal.
· Cap all hoses after removal.
· Inspect all hoses, lines, and fittings for
cracks, bends, nicks, dents, stripped
threads,
and
cuts.
Replace
all
damaged parts.
(3)
Remove hose assembly (7) and seal (8) from tee (9).
Discard seal.
(4)
Remove hose assembly (10) and seal (11) from tee
(9). Discard seal.
(5)
Loosen nut (12) and remove elbow (13), seal (14) and
needle valve (6) from connector (15). Discard seal.
(6)
Remove connector (15) and seal (16) from pump (17).
Discard seal.
(7)
Loosen nut (18) and remove elbow (13) and seal (19)
from needle valve (6).
NOTE
Mark position and angle of tee prior to
removal for ease of installation.
(8)
Loosen nut (20) and remove tee (9) and seal (21)
from adapter (22). Discard seal.
(9)
Remove adaptor (22) and seal (23) from needle valve
(6). Discard seal.
2-40