TM 5-3895-383-24
(3)
Remove hose assembly (5) from connector (6).
(4)
Remove hose assembly (7) from elbow (8).
(5)
Remove two bolts (9), washers (10), and hand pump
(1) from bracket (11).
(6)
If damaged, remove two bolts (12), washers (13), and
bracket (11) from hydraulic oil tank (14).
(7)
Remove connector (6) from hand pump (1).
(8)
Remove seal (15), and seal (16) from connector (6).
Discard seals.
NOTE
Note or mark direction of elbow prior to
removal.
(9)
Loosen nut (17) and remove elbow (8) from hand
pump (1).
(10)
Remove seal (18), and seal (19) from elbow (8).
Discard seals.
b. Installation.
(1)
Install seal (18) and seal (19) on elbow (8).
(2)
Install elbow (8) in hand pump (1).
(3)
Position elbow (8) in original direction and tighten nut
(17).
(4)
Install seal (15), and seal (16) on connector (6).
(5)
Install connector (6) in hand pump (1).
2-37