Remove two locknuts (6), washers (13), bolts (14), washers (13), four plates (11), spacers (15), and two bushings (16) from
blade assembly (5). Discard locknuts.
· Blade assembly weighs 1350 lbs (612 kg). Keep clear of equipment when equipment is
being raised or lowered. Equipment may fall and cause serious injury or death to
· Do not allow heavy components to swing while hanging by lifting device. Equipment may
strike personnel and case serious injury or death.
· Exercise extreme caution when working near a cable or chain under tension. A snapped
cable, shifting or swinging load may result in injury or death to personnel.
Using lifting device, remove blade assembly (5) from yoke (12).
Place blade assembly (5) on stable surface capable of supporting minimum of 1350 lbs (612 kg).