TM 5-3895-383-24
Illustration 296
2.
Both the lubrication fittings for the rear end of the
steering cylinder are located on the left side of the
machine. Lubricate the fittings (2) for the rear end of the
steering cylinders.
3.
Raise the steering frame lock pin into the unlocked
position.
Tilt Hood Actuator - Lubricate
SMCS Code: 7251-086-AQ
Wipe all grease fittings before lubricating.
Illustration 297
1.
Raise the engine hood. The tilt hood actuator is located
on the right side of the machine.
2.
Fully extend the cylinder and grease the inner post.
Grease the entire length of the inner post.
Illustration 298
3.
Lubricate the two fittings (1) on the cylinder.
4.
Close the engine hood.
Maintenance Section
Tilt Hood Actuator - Lubricate
1-121