TM 5-3895-383-24
Hydraulic System Oil Level - Check
SMCS Code: 5056-535-FLV; 5095-535-FLV
Illustration 264
1.
Open the engine compartment.
Illustration 265
2.
Observe the level of the hydraulic oil in the sight gauge
when the oil is warm. Maintain the oil level to the mark
on the sight gauge.
3.
If necessary, add oil.
Refer to the Operation and Maintenance Manual, "Refill
Capacities. Refer to the Operation and Maintenance
Manual, "Lubricant Viscosities".
Illustration 266
4.
In order to add the oil, remove the filler cap (1). Add the
oil through the filler tube. Clean the oil filler cap and
install the filler cap.
5.
Close the engine compartment.
Maintenance Section
Hydraulic System Oil Level - Check
1-112