TM 5-3895-383-10
Operation Section
4-31
Machine Controls
Illustration 43
1. Open the access door.
Illustration 44
2. Push the toggle switch (1) upward in order to raise
the hood. Raise the hood to the desired height or
raise the hood to the fully opened position. Release
the toggle switch. The toggle switch will return to
the neutral position.
3. Push the toggle switch (1) downward in order to
lower the hood. Hold the toggle switch in position
until the hood is closed. Release the toggle switch.
The toggle switch will return to the neutral position.
Manual Operation
Use a wrench to turn the lift motor in order to raise the
hood manually and lower the hood manually.
Illustration 45
1. The access hole is located on the left side inner
fender.
Illustration 46
2. Insert a socket wrench through the hole and onto
the shaft of the lift motor. Turn the wrench
clockwise in order to raise the hood. Turn the
wrench counterclockwise in order to lower the hood.