Table 2-1. Operator Preventive Maintenance Checks and Services CONT.
Item to be
Do not overfill hydraulic oil tank.
Damage to hydraulic system
components may occur.
The Roller must be parked on a
level surface when checking the
hydraulic oil level.
Hydraulic oil shall be checked
warm and cold. Engine shall be
run at least five minutes before
performing warm oil check.
Disregard markings on sight gauge.
Maintain hydraulic oil level
according to label markings.
a. Open access door assembly.
b. Check that hydraulic oil level is
between the high and low marks on
the label beside the hydraulic oil tank
sight gauge. If level is below LOW
level mark, fill hydraulic tank with
hydraulic oil (page 2-5).
c. Close access door assembly.
Hydraulic oil level is
below LOW level
mark, or above
HIGH level mark on
Check fuel level gauge. Fill fuel tank, if
level is low.
Fuel level is very low