Stopping the Machine
SMCS Code: 7000
Park the machine on a level surface. If it is
necessary to park on a grade, securely block the
tires and the drum.
Do not apply the parking brake while the machine
is moving unless an emergency exists.
1. Move the propel control (1) to the STOP position.
2. Apply the parking brake. Push the parking brake
control (2) inward.
3. Rock the throttle control (3) forward to the LOW
4. Move the control (4) for the leveling blade (if
equipped) to the LOWER position. Lower the blade
to the ground.
If freezing conditions are expected, the tires and the
drum should be cleaned of mud and dirt. Park the
machine on wood planks.