Do not turn the main housing upside down to remove the
swashplate from the housing. Numerous parts in the
housing, which are finely polished, can be scratched or
Remove sleeve bearing (18) and swashplate (19) from
Sleeve bearing (18) must be reinstalled in its original
position on swashplate (19).
Note the position of sleeve bearing (18) on the
swashplate prior to removal. Remove sleeve bearing
(18) and pin (20) from swashplate (19).
Use Tool (D) to remove cylinder block assembly (21)
from housing (22).
Remove seven pistons (23) and slipper guide (24) from
cylinder block (25).
Remove retainer guide (26) from the cylinder block.