TM 5-3895-382-24
12.
Remove two O-rings (19) and locating pins (20).
13.
Use a hammer and soft punch to remove shaft
assembly (21) from the housing.
14.
Remove O-ring (22). Inspect the O-ring for wear or
damage and replace, if necessary.
15.
Remove seal cover (23).
16.
Remove seal (24) from cover (23). Check the seal for
wear or damage and replace, if necessary.
17.
Remove retaining ring (25).
18.
Use a suitable puller to remove bearing (26).
19.
Remove six screws (27) and cover (28) with the gasket.
Check the gasket for wear or damage and replace. if
necessary.
16-78