TM 5-3895-382-24
12.
Remove back-up ring (13), O-ring seal (14), O-ring seat
(15)(not shown), two bearing races (16) and needle
thrust bearing (17) from spool and sleeve assembly
(11).
(11) Spool and sleeve assembly. (13) Back-up ring.
(14) O-ring. (15) O-ring seat. (16) Bearing races.
(17) Needle thrust bearing.
13.
Components of the geroter assembly shown in above
photo.
14.
Remove pin (18) from spool and sleeve assembly
(11)(slip fit).
15.
Separate control spool (19) and control sleeve (20).
16.
Remove centering spring kit (21) from control spool
(19).
NOTE:
Spring kit (21) has six centering springs.
16-17