Disconnect hose assembly (6) from the brake/shift
valve. Cap and plug immediately.
Disconnect hose assembly (10) from the steering pump.
Cap and plug immediately.
Remove the bolt, and remove hose assemblies (6) and
(10) from clamp (7).
Disconnect throttle cable (8) from the engine. Loosen
jam nut (9), and remove throttle cable (8) from the
bracket. Move the throttle cable out of the way.
Lower operators platform (11) as shown. Refer to the
topic Tilt & Lower Operators Platform" in this module.
Remove two bolts and nuts (12) from the pivot points.
When removing the operators platform make sure
all hose assemblies, cables and electrical
connectors are free.
Attach a hoist and lifting straps to operators platform
(11) as shown. Remove the operators platform from the
machine. The weight of the operators platform is
318 kg (700 lb).
For installation of the operators platform, reverse
the removal steps.