TM 5-3895-382-24
Illustration 95
1.
Remove six bolts (1). Remove cover (2) and the
gasket.
Illustration 96
2.
Remove O-ring seal (3).
Illustration 97
3.
Install Tool (A). Remove gear (4).
Illustration 98
4.
Use a suitable lever in order to remove seal (5).
Illustration 99
5.
Use a suitable press in order to remove shaft (6), seal
(7), and impeller (8) from housing (9).
NOTE:
The water pump for Type 2 Engines and 7BJ
Engines is not serviceable. Contact your
Caterpillar
dealer
for
more
replacement
information.
Water Pump - Assemble (Type 1 Engines and 9RM
Engines)
SMCS Code: 1361-016
Assembly Procedure
NOTE:
For a complete description of Type 1 and Type 2
engines, refer to the Disassembly and Assembly,
"Engine Design" topic.
7-42