Rollover Protective Structure
Repair of the ROPS may be performed only after
consulting the factory. Replace bolts using only the
size and torque recommended on the sign located
by the ROPS.
Look for any loose or damaged bolts. Replace damaged
bolts or missing bolts with original equipment parts only.
Retighten bolts to a torque of 460 60 Nm
(340 45 lb ft).
Replace ROPS mounting supports If the ROPS rattles or
makes a noise when the machine is operated on a rough
Do not straighten or repair by welding reinforcement
plates to the ROPS.
Contact your Caterpillar dealer for repair of cracks in
welds, castings or any metal section on the ROPS.
Every 2000 Service Hours or 2 Year