TM 5-3895-382-10
Operation Section
4-36
Transportation Information
Transportation Information
Machine Lifting/Tie-down Information
NOTICE
Improper lifting or tie-down can allow load to shift
and cause injury or damage.
Appendix E contains military model specifications for
transportation of rollers.
Use properly rated cables and slings for lifting.
Position the crane or lifting device for a level machine
lift. Spreader bar widths should be sufficient to prevent
contact with machine.
1. Install the steering frame lock pin to hold the front
and rear frames rigid. Remove pin (1), lower
steering frame lock pin (2) then reinsert pin (1).
2. Attach two lifting cables to right and left rear lifting
eyes. These lifting eyes are identified on the
machine by a LIFT stencil.
3. Attach two lifting cables to the right and left front
lifting holes. These lifting holes are identified on the
machine by a LIFT stencil.