FIELD MAINTENANCE (UNIT AND DIRECT SUPPORT MAINTENANCE) REPAIR PARTS
AND SPECIAL TOOLS LISTS (RPSTL) INCLUDING (SUSTAINMENT MAINTENANCE
REPAIR PARTS) INTRODUCTION - CONTINUED
SPECIAL INFORMATION - CONTINUED
Cancelled and Replaced By Part Numbers. Caterpillar implements
a Modernization through Spares program for
its equipment through the use of cancelled and replaced by part numbers. If the part number you ordered has been
cancelled and replaced by a new part, the new part will be automatically shipped to you. Install this new part; DO
NOT return it.
Usable On Code (UOC). The UOC appears in the lower left corner of the DESCRIPTION column heading.
Usable on codes are shown as "UOC:" in the Description Column (justified left) on the first line under the applica-
ble item/nomenclature. Uncoded items are applicable to all models. Identification of the UOC's used in the RPSTL
ROLLER, MOTORIZED, VIBRATORY TANDEM, STEEL DRUM, CB534C
ROLLER, MOTORIZED, VIBRATORY TANDEM, STEEL DRUM, CB534B
Fabrication Instructions. Bulk materiels required to manufacture items are listed in the Bulk Materiel functional
group of this RPSTL. Part numbers for bulk materiel are also referenced in the Description Column of the line item
entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in TM 5-3895-379-23.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the
item number column. This index number is a cross-reference between the NSN/P/N Index work package and the
bulk materiel list in the repair parts list work package.
Associated Publications. The publication(s) listed below pertain to the Roller, Motorized, Vibrating Tandem Steel
Drums and its components:
TM 5-3895-379-10 . . . . . . . . . . . . . . . . . . . . Operator's Manual for Roller, Motorized, Vibrating Tandem
TM 5-3895-379-23 . . . . . . . . . . . . . . . . . . . . Field Maintenance Manual for Roller, Motorized, Vibrating
HOW TO LOCATE REPAIR PARTS
When National Stock Number is Known:
First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The
NSN is arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
When Part Number is Known.
First. If you have the P/N and not the NSN, look in the PART NUMBER column of the P/N index work
package. Identify the figure and item number.
Second. Look up the item on the figure in the applicable repair parts list work package.