DRUM ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
The CB534B Roller model has shims between drum support (3) and yoke (8) on vibratory side of drum
assembly. Note the number of shims when removing six bolts.
On vibratory side of drum assembly (24), remove six bolts (31) and washers (32) that fasten drum support (3) to yoke
(11). For the CB534B Roller, remove shims (33).
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Weight of drum assembly is 4750 lb (2155 kg).
Raise drum assembly (24) until it is just off floor. Move drum assembly away from roller until it is clear of yoke or
frame. Place drum assembly on floor and chock drum.