DRUM ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove bolt (7), washer (8) and clamp (9) that fasten
hose assemblies (10) to yoke (11).
Oil is very slippery. Immediately wipe up
any spills. Failure to follow this warning
may cause injury.
Cap and plug all lines and fittings to
ing the system.
Tag and mark all hydraulic lines and
electrical wires as they are removed or
Use container to capture any hydrau-
lic oil which may drain from lines.
Dispose of hydraulic oil IAW local
policy and ordinances.
Disconnect four hose assemblies (10) from vibratory
motor (12). Cap and plug hoses and ports immediately.
Move hose assemblies aside.