TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
DRUM ASSEMBLY
NOTE
Apply sealing compound to sixteen nuts.
1.
Install two new locknuts (29) at `X' to hold eccentric assembly (25) to drum assembly (6). Tighten nuts to 276 27
lb-ft (374 37 Nm).
2.
Install lifting link brackets to drum assembly (6). Attach a lifting device and lay drum assembly (6) on floor. Weight of
drum assembly (6) is approximately 4500 lb (2041 kg).
3.
Install twenty-four bolts (33), washers (34) and nuts (35) that fasten six mounts (36) on both ends of drum assembly (6).
0209 00-14