TM 5-3895-379-23
DRUM ASSEMBLY REPAIR - CONTINUED
0209 00
DRUM DISASSEMBLY - CONTINUED
6.
Remove nine nuts (15), washers (16) and plate (17) from drum assembly (6).
7.
Remove four bolts (18), washers (19) and driveshaft (20).
8.
Remove nut (21) and washer (22) from wheel clamp (23).
9.
Use puller to remove wheel clamp (23) and key (24) from eccentric assembly (25).
10.
Remove six bolts (26) and plate (27) from eccentric assembly (25).
NOTE
DO NOT remove two locknuts at location X at this time. Two nuts must remain to hold eccentric assembly
in place.
11.
Bend tabs (28) down on eight locks (29) and remove fourteen of sixteen locknuts (30) and eight locks (31) from housing
(32). Discard locknuts.
0209 00-4