PROPEL MOTOR AND TORQUE HUB REPLACEMENT
INSTALLATION - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Weight of drive plate, propel motor and
torque hub as a unit is 500 lb (227 kg).
Install drive plate (6) and propel motor and torque hub
(5), as a unit, on mounts with twenty-four new lock-
washers (8) and bolts (7).
END OF WORK PACKAGE