TM 5-3895-379-23
SEPARATE AND CONNECT PROPEL MOTOR AND TORQUE HUB - CONTINUED
0191 00
CONNECT
1.
Position new O-ring (5) on torque hub (2).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
2.
With assistance, install propel motor (3) on torque hub (2) with two bolts (4).
NOTE
Weight of propel motor is 55 lb (25 kg).
NOTE
Weight of propel motor and torque hub is 270 lb (122 kg).
3.
Using lifting strap and hoist, raise and support propel motor (3) and torque hub (2).
4.
Remove two link brackets (1) from torque hub (2).
5.
END OF WORK PACKAGE
0191 00-3/(0191 00-4 Blank)