ROCKER SHAFT ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Tools and Special Tools
Materials/Parts - Continued
Shop equipment, general purpose (Item 30, WP
TM 5-3895-379-23P, Figure 9
It is not necessary to remove the oil supply tube in order to remove rocker shaft assembly.
Begin removal of rocker arm assembly starting at the end brackets and moving toward the center.
If pushrods are removed, tag and mark for installation.
Remove three nuts (1) and bolts (2) from rocker shaft
Remove rocker arm assembly (3).
If required, remove oil seal (4) from oil supply pas-
sage in cylinder head (5). Discard oil seal.